The Conveying Principle of the Central Conveying System

The central conveying system is mainly used to transport materials to various systems. The central conveying system adopts centralized automatic control, with 24-hour continuous feeding, uniform mixing, and flexible color changes. Therefore, it is widely used in many fields.

The centralized feeding automatic batching system implements a dedicated management responsibility system and a single machine operation responsibility system for the central centralized feeding system. Maintenance of the central centralized feeding system should establish maintenance records. Which automatic batching system is more suitable for daily operation, maintenance, and recording. After cleaning the suction hopper and drying bucket, it should be installed in place and the central centralized feeding system's filter should be cleaned regularly. Timely protection of the central centralized feeding system's motor. If the motor does not rotate or stops, it should be checked and repaired in time.

The material hopper on the central conveying system has various feeding methods

Generally, small extruders do not require manual feeding. Large extruders or multiple extruders discharge side by side. The central conveying system commonly used is the spring feeding system. The central conveying system, automatic feeding system, centralized feeding system, automatic feeding system, and compressed air pipeline feeding system. The three conveying methods of the central conveying system: spring feeding device, which has a simple structure, convenient operation and maintenance, and is suitable for conveying particles and powders; the central conveying system device, which supplies the extruder hopper with material to the central conveying system, the fully automatic loading system device covers a small area, requires a small number of people, the environment is relatively clean, and can be used to transport particles and powders.

The principle of powder transportation in the central conveying system

When the central oil supply system's lubricating oil tank and hydraulic oil are insufficient, the oil pump will suck in air, or the filter will be clogged with dirt, causing oil pump oil shortage, and the oil entering with bubbles will flow out of the installed blades and produce noise. The solution is to check the oil level. Prevent air intake and clean the oil filter. The high viscosity of hydraulic oil increases flow resistance. The hydraulic oil certified by the central oil supply system must be replaced. Because the oil pump or claw bearing or blade is damaged, the concentricity deviation of the coupling will produce noise, so it is necessary to adjust the concentricity or replace the parts.

The reversing valve of the central conveying system does not respond to faults but can still work normally, such as valve core wear, internal leakage, burrs blocking, inflexible action, insufficient current of the solenoid valve, noise, etc. The solution is to clean the valve core. If the valve core is worn, new parts must be replaced, and the current must be stable and sufficient. When hydraulic components are damaged or the pipeline is blocked, high-speed flow of hydraulic oil will produce noise. Mechanical component failure, bearing wear, or insufficient lubrication oil or loose parts of the machine. Find the cause, tighten or replace parts to ensure sufficient lubrication.

Popular Plastic Molding & Auxiliary Machinery Products

Dehumidifying Dryer (Optical Grade)

Central Conveying System

Fast Blade Type Plastic Crusher

Hot Plastic Molding & Auxiliary Machinery Blogs