Instructions for Use of the Dehumidifier Dryer (Standard Type)

The use of dehumidifying dryer (standard type) can be divided into single-machine and centralized. The three-in-one dehumidifying dryer is especially suitable for places with a high degree of automation and compact space. The whole is controlled by IC, which is easy to operate, and a dew point machine that can monitor the dehumidification effect of the machine at any time is provided as an option. It has beautiful appearance, stable performance and low energy consumption.

1. The working principle of the dehumidifying dryer (standard type)

The internal circulation of the dehumidifier: through the operation of the compressor → discharge the high temperature and high pressure gas from the exhaust port → enter the condenser for cooling → turn into low temperature and high pressure gas → intercept the flow through the capillary → turn into low temperature and low pressure liquid → evaporate and absorb heat through the evaporator → Return to the compressor to become low temperature and low pressure gas, and so on.

The external circulation of the dehumidifier: in the case of normal startup → through the operation of the fan → the moist air is sucked from the air inlet → through the evaporator → the evaporator absorbs the moisture in the air on the aluminum sheet → becomes dry air → after condensation Heat dissipation → blow out from the air outlet.

2. Features of the three-in-one dehumidifying dryer

(1) The high degree of automation reduces the labor intensity of operators.

(2) The honeycomb runner using Japanese ceramic fiber as the base material has good dehumidification effect and stable and reliable performance.

(3) Dehumidification, drying and feeding are independent operations.

(4) Drying temperature, regeneration temperature PID control.

(5) PLC touch screen can be added, the operation is simple and clear at a glance.

(6) The dehumidifying drye plastic (standard type) has various perfect protection circuits, and has the function of dehumidification after shutdown.

3. Notes on the use of the dehumidifying dryer (standard type)

Dehumidifiers should be cleaned from time to time to keep them clean. The dehumidifier should be placed in the center of the room. The air inlet and outlet of the refrigerated dryer should not be blocked by obstructions, and the air filter should be cleaned. When the ambient temperature is lower than 15°C, the water droplets attached to the surface of the evaporator will freeze and the effect of the dehumidifier will be weakened. If the ambient temperature exceeds 40°C, the pressure in the system will increase and the compressor will be overloaded. At this time, the overload protector should be Disconnect the wiring or the compressor motor will be damaged. Therefore, the best operating temperature range of the dehumidifier is 15℃~40℃. If the humidity in the air is lower than 30%, it will be too dry and uncomfortable, so it is controlled by a reliable humidity controller to maintain the range of 50%~60%. When using, the doors and windows should be closed as much as possible, so that the indoor dehumidification effect can be achieved. The body of the dehumidifying dryer should be placed flat, and should not be tilted or sideways to avoid machine failure or abnormal noise.

The water storage capacity in the dehumidifying dryer, for example, dehumidifying hopper dryer is too full. In order to avoid overflowing and polluting the wet floor, when the machine must be transported during operation, please unplug the power cord first, and then pour out the water in the water storage bucket. After the dehumidifier is moved, it is best to put it quietly for four to six hours before starting it for use. Because the compressor pipeline in the dehumidifier contains cold coal, after moving, the cold coal must return to its original position after four to six hours.

Clean the air filter regularly (about once every 2 weeks) to maintain the dehumidification and dust removal efficiency and life of the machine. To clean the air filter, wash it with water below 40 ℃; it is better to clean it with detergent. After washing off the dust, rinse it with water, dry it in the shade and put it back into the body. When cleaning the body, gently wipe it with a damp cloth; avoid direct splashing water to clean it, so as not to damage the electrical insulation. There are sticky objects on the surface of the body, which can be washed with soapy water. Avoid spraying with gasoline, petroleum spirit, solvent or spray insecticide to avoid peeling paint or discoloration. Do not use thin rods or iron wires to dig the inside of the machine to avoid malfunction or danger. Please unplug the power cord to maintain the life of the machine when there is a power outage or when it is not used for a long time or when traveling.

Popular Plastic Molding & Auxiliary Machinery Products

Dehumidifying Dryer (Standard Type)

Vacuum Hopper Loader

Masterbatch Mixer

Hot Plastic Molding & Auxiliary Machinery Blogs